GT-W2910 - Two Post Lift , Base free – 4 ton capacity

  • Sale
  • R 36,199.00
  • Regular price R 41,500.00


General Information
· Clear floor design makes under-vehicle service more convenient
· Manual lock release 
· Dual cylinders located in Master and slave column,
· Dynamic test 115% of the rated capacity.
· Static test: 150% of the rated capacity
· Dual anti skidding safety device from column ladder safety to hydraulic seal protection
· Special hydraulic system designed to avoid overload running
· ABS control box, 24v low voltage control system
· High strength chain drive system
· High quality seals from Italy
· CE Certified

 

Technical information

Lifting capacity: 4000 kg
Locking release: Manual
Dead weight: 640kg
Overall height: 3708mm
Overall width: 3384mm
Minimum height: 100mm
Maximum height: 1960mm
Width between columns: 2760mm
Arm length: 685-1050mm | 845-1330mm
Lifting height: <60s
Lowering time: 18-40s
Dimensions:
3700*520*700 mm
970x 290*350mm

ith a low ride height. The steel ropes and hydraulic pipes go over the top.



 

IMWinners Arm
Arm with rubber pad
IM Winners
Cradle with door protection
IM Winners
Tool tray
Features: Benefits:
Manual release When you have a power outage, the locks can still be released to lower the vehicle.
Clear floor design The hydraulic hose and equalization cables run across the top of the lift through a metal bar (conduit) that connects both columns in the Overhead lift. The metal bar (conduit) is
there to guide the hose and cables and is not designed to support any vertical weight. There is a cut-off cable (connected to the power unit) located just below the metal overhead conduit which “kills” power to the motor preventing damage to the top of the car, if the lift operator was not paying attention.
Dual cylinders Master and slave column, to assist with lifting of vehicles.
Dynamic test 115% of the rate capacity Ensures the hoist works correctly through its full cycle of operation
Static test: 150% of the rated capacity Static load testing, to unsure the lifts can handle the recommended tonnage. Safety test.
Dual anti skidding safety device from column ladder to hydraulic seal protection If the hydraulic system fails for some reason the vehicle on the lift will not fall, the lifts safety locks will lock into place to prevent any accidents.
Hydraulic system Designed to avoid overload running
ABS control box, 24v low voltage control system Conforms to ISO standards and electrical components of the lift.
High quality seals from Italy Seals can withstand high pressure and mechanical stress.
Quality power rack Ensures safety at all heights.
Conforms to CE requirements The CE Mark on a product or machine identifies it as complying with all the of safety requirements established by the European Union.
Easy to install Requires a flat floor and solid concrete base for bolting. Another advantage of the overhead two post lifts is that there is no obstruction on the ground. If you spend a lot of time under a vehicle on the lift — either on a rolling dolly or with a jack — you’ll appreciate the clear, open floor space. When there’s no vehicle on the lift, it’s also easier to use the space
between your lift.
Training available Technicians can be professionally trained to use the machine and get the maximum benefit from it.
1 year warranty The machine will be repaired if there are any factory faults and can be replaced if required.
Spares available Should you have a breakdown you will not have to wait for your machine to be repaired. If there is anything we don’t have, we fly it in directly from the Suppliers.
Operational videos

Technicians can learn how to operate the machine by watching a video, which is easier and more simple than written instructions.

 

4 ton clear floor 2 post lift plan

INSTALLATION & DELIVERY NOT INCLUDED